Depending upon usage, your Granite countertops should be sealed twice a year. We recommend sealing every 6 months because some household cleaners may cause your sealer’s bond to weaken. Granite countertops must be sealed once a year at the minimum.
A good way to test the sealant’s effectiveness on your Granite countertops is to spill water on a small area. If the water beads up, Granite countertops are still sealed. If the water starts to seep into the Granite, causing the Granite to appear darker, it is time to re-seal.
There are many stone sealers on the market today.
We recommend DuPont® Bulletproof.
This sealer penetrates the stone and works its way into the cracks and pores in the Granite to keep out all other foreign and potential stain forming materials.
Warm, soapy water is an easy way to effectively clean you Granite countertops and keep them looking beautiful for a long time. Simply use a soapy sponge or cloth to wash the Granite countertops and be sure to completely dry with a clean cloth to avoid streaking.
We suggest using anti-bacterial Windex or bleach diluted in warm water. Simply dilute the bleach with warm water and wipe onto the surface of your Granite countertops. It may cause some streaking or hazing. You may need to use a damp cloth to remove the haze. Dry completely with a dry cloth.
Your installation may have involved a cook top cut out or perhaps an over mount sink cut out. Granite dust is very fine and may linger in the air for days. As it settles onto your countertops, it will leave you gritty texture. Simply clean your Granite with soapy water as discussed above and your gritty problem should be solved.
This is usually caused by cleaning the surfaces of your Granite countertops but not completely drying it. It may also be caused by using too much soap when cleaning your Granite countertops. We recommend using a damp towel followed by a dry towel to remove the haze. Sealing with a water-based sealer can also leave Granite countertops looking cloudy.
These “surface cracks” are known in the industry as fissures. These are common with many colours of Granite that have a linear type of pattern. They do not penetrate the Granite and do not in any way affect the integrity of your Granite countertops.
“Pitting” is a characteristic of all Granite. It is more noticeable in some colours. Pitting is described as tiny, sometimes slightly rough indentions or pock marks. Rest assured that this does not decrease durability of the stone.
With a solvent-based sealer, the entire process will only take about 10 minutes. Simply spray on the product and wipe it onto your Granite countertops. Let it dry to a haze (This is very important. In order to get a good bond, you need to allow the sealer to penetrate or impregnate your Granite). After 5 to 10 minutes, use a clean terry cloth or paper towel to wipe off the haze. You have now SEALED you Granite countertops. With a water-based sealer, the process can take several hours with many coats and some buffing required. See the backside of sealer for specific instructions.